Just like I promised, we’re back with another master bathroom project today! If you missed yesterdays post about our vanity makeover, then you can check that out below, along with a few other master bathroom project links from the past.
Today we’re going to share a layered molding board and batten treatment that we applied to the largest empty wall in our master bath, that we now use to hang our towels on.
We wanted our bathroom to appear as large as possible, because it’s so small, so we knew that some sort of white, clean molding would do the trick. We thought about doing the same sort of board and batten wall treatment that we put up in Aubrielle’s old room…
…but we wanted the look in our bathroom to be a bit more masculine and “chunky”,
so here’s how we did it:
We started off by painting the actual wall white first. I know you can put MDF and other flat pieces of wood or paneling on the wall for a super smooth finish, but we always just save our money and paint the wall white, to make it just LOOK like it’s all one big piece of molding.
Next we figured out our wall design and laid it out, so we could see how it was all going to fit together.
By using a piece of thick brick molding, some decorative picture frame molding and quarter round, we were able to turn a few plain, primed, MDF boards into a look that was a lot more interesting! Have you ever done this? Layering different moldings on top or under each other to get a totally different look? It’s actually pretty fun, and can save you some money in the long run!
Our molding design was essentially two different pieces.
1. The top piece or ledge and 2. The vertical 6 inch primed MDF boards with trim on either side.
To make applying the molding to the wall a lot easier, we assembled the top ledge prior to attaching it to the wall. Because molding can be pretty fragile we used a strong adhesive to adhere everything, and then just a few small finishing nails and some tape to keep a couple of pieces in place while things dried.
If you use JUST nails when applying molding and aren’t careful, sometimes it can crack it.
Once everything was dry, our ledge piece was really easy to cut to our exact specifications; and because it was all in one piece, we didn’t have to worry about any of the individual pieces being off at all.
Our ledge went up first. We ran it the same height as the top of the shower surround, and nailed it up with a nail gun and finishing nails.
Then the vertical 6 inch MDF boards went up under the ledge, with the quarter round on the exposed squared off sides. Because the boards were a bit thicker than our faux chunky baseboard treatment, we just used our angled chop saw and sliced a small angle towards the bottom, so everything met up better and blended in.
You can see our tutorial for Faux chunky baseboards below.
This is a shot of what everything looked like once it was all up. We had thought we might want to take this wall treatment over behind the toilet, but in the end we decided against it.
Next was the monotonous work of filling in nail holes, painting everything white and running caulk along all the little gaps and spaces. Even though these few steps can be really time consuming, they’re super important. It’s what makes the whole look really come together!
We purchased the monogrammed hooks at Anthropology and the mint colored towels at World Market.
At the beginning we toyed around with the idea of propping pictures or art against the ledge and the wall, but decided we didn’t want to take the risk of anything falling down. I still wanted a bit of color in the space though, so I made up this really simple, fun, happy-yellow sign with one of me and Cason’s favorite quotes on it. “Life doesn’t have to be perfect to be wonderful.”
The board is just a 6 inch piece of wood I purchased at Lowe’s that I painted yellow. We’ve also made the vinyl available for purchase in our Design Shop!
We’re in LOVE with how this wall turned out! It’s sophisticated looking and makes the room feel a lot larger because it draws your eye upward, instead of stopping at a short little towel rack in the middle of the wall. We were a little nervous that all the white would have the room looking a bit stark, but we’ve found that it just makes the space feel a lot fresher and more welcoming than before. PLUS, adding fun pops of color to warm up the space and give it personality (that can easily be changed out later on if we want) is way more fun!